Guangzhou Weixing Automobile Fitting Co.,Ltd.
HELPING CHINA'S AUTO PARTS MARKET AND ACHIEVING WORLD NO.1
Add to Cart
MSC90 Air Compressor Auto Cooling System 12V For Mitsubishi outlander MR568374 WXMS067
Parameter:
| Model Number | WXMS067 |
| Car Model | For Mitsubishi outlander |
| Compressor model | MSC90 6PK |
| Type | Air Conditioner Compressor |
| OE No. | MR568374 |
Test car air conditioning compressor
1. Start by visually inspecting the compressor for any signs of damage or leakage.
2. Measure the voltage at the compressor's electrical connector using a multimeter to ensure it is receiving power.
3. Check the clutch engagement by turning on the air conditioning and observing if the compressor clutch engages and spins freely.
4. Use a manifold gauge set to check the high and low side pressures. Compare the readings to the manufacturer's specifications to determine if the compressor is functioning properly.
5. If all other tests indicate a fault with the compressor, it may need to be removed and taken to a qualified professional for further testing and repair.
When it comes to installing a car air conditioning compressor, it is recommended to follow these steps:
1. Start by removing the refrigerant from the system using a refrigerant recovery machine.
2. Disconnect the electrical connector and any mounting brackets or bolts securing the compressor to the engine.
3. Remove the drive belt and any other components obstructing access to the compressor.
4. Replace the old compressor with the new one, ensuring the fittings are properly aligned and any gaskets or seals are in place.
5. Reinstall the mounting brackets, bolts, and electrical connector.
6. Reinstall any components that were removed to access the compressor.
7. Evacuate and recharge the system with the appropriate amount of refrigerant following the manufacturer's guidelines.
8. Test the system to ensure the compressor is functioning properly and there are no leaks.
Please note that it is recommended to consult the vehicle's service manual or seek professional assistance for specific instructions on testing and installing a car air conditioning compressor.
When an automotive air conditioning compressor is damaged, it can manifest in various signs and symptoms. Here are some common indications of compressor damage:
1. Lack of cooling: One of the primary signs of a faulty compressor is a decrease in the cooling capacity of the air conditioning system. The air blown into the cabin may not be as cold as it used to be. This can be attributed to a lack of compression and reduced refrigerant circulation.
2. Loud noises: A damaged compressor may produce unusual and loud noises during operation. These noises can include grinding, squealing, or rattling sounds. Such sounds indicate internal mechanical issues or loose components within the compressor.
3. Leaking refrigerant: If you notice refrigerant leaking from the compressor or any other component of the AC system, it can indicate compressor damage. Leaks are often caused by worn-out seals or cracks in the compressor housing, resulting in a loss of refrigerant.
4. Excessive vibration: A damaged compressor may cause abnormal vibrations in the vehicle. These vibrations can be felt through the steering wheel, dashboard, or entire cabin. Excessive vibration can indicate internal damage or misalignment of compressor components.
5. AC system failure: In severe cases, a damaged compressor can lead to a complete failure of the air conditioning system. The compressor may seize, preventing any refrigerant circulation and resulting in no cooling at all.
If any of these signs are observed, it is advisable to have the compressor inspected and repaired by a certified technician. Prompt attention to compressor damage can prevent further damage to the AC system and ensure optimal cooling performance in the vehicle
