Guangzhou Weixing Automobile Fitting Co.,Ltd.
HELPING CHINA'S AUTO PARTS MARKET AND ACHIEVING WORLD NO.1
Add to Cart
Parameter:
Model Number | WXTT084 |
Car Model | For Toyota Camry/RAV4/Vanguard 2.0 |
Type | Ac Compressor |
Year Model | 2011-2018 |
Compressor type | 7SEU17C |
OE NO. | 883100R070/883100R071 |
Test car air conditioning compressor
1. Start by visually inspecting the compressor for any signs of damage or leakage.
2. Measure the voltage at the compressor's electrical connector using a multimeter to ensure it is receiving power.
3. Check the clutch engagement by turning on the air conditioning and observing if the compressor clutch engages and spins freely.
4. Use a manifold gauge set to check the high and low side pressures. Compare the readings to the manufacturer's specifications to determine if the compressor is functioning properly.
5. If all other tests indicate a fault with the compressor, it may need to be removed and taken to a qualified professional for further testing and repair.
When it comes to installing a car air conditioning compressor, it is recommended to follow these steps:
1. Start by removing the refrigerant from the system using a refrigerant recovery machine.
2. Disconnect the electrical connector and any mounting brackets or bolts securing the compressor to the engine.
3. Remove the drive belt and any other components obstructing access to the compressor.
4. Replace the old compressor with the new one, ensuring the fittings are properly aligned and any gaskets or seals are in place.
5. Reinstall the mounting brackets, bolts, and electrical connector.
6. Reinstall any components that were removed to access the compressor.
7. Evacuate and recharge the system with the appropriate amount of refrigerant following the manufacturer's guidelines.
8. Test the system to ensure the compressor is functioning properly and there are no leaks.
Please note that it is recommended to consult the vehicle's service manual or seek professional assistance for specific instructions on testing and installing a car air conditioning compressor.
SIGNS OF A FAULTY CAR A/C COMPRESSOR
Experiencing hot air instead of cool air when running your car's air conditioning system is a clear indication of a potential problem with the A/C compressor. This device is responsible for circulating cool air throughout the cabin, so if warm air is being emitted, it could mean that the compressor is failing. Fluctuating temperatures from the vents can also signal the need for an A/C compressor replacement.
There are several visual signs to look out for when determining if the A/C compressor is faulty. Start by inspecting the compressor and clutch for rust or physical damage. A malfunctioning clutch can cause the drive belt to wear down faster, potentially leading to further damage and costly repairs. Keep an eye out for torn, dirty, or loose belts, as this can compromise the performance of your HVAC system. Additionally, any signs of oil leaks around the compressor or clutch indicate an issue, as automotive compressors require sufficient oil levels for smooth operation.
Squealing noises originating from under the hood are another clear indication of a failing A/C compressor. If you notice loud sounds when the compressor engages, it may be a sign that the A/C clutch is faulty. The clutch should operate smoothly without any obstructions.
Identifying these signs early on can help prevent further damage and costly repairs. If you notice any of these symptoms, it is advisable to have your car's A/C compressor checked by a professional.