Guangzhou Weixing Automobile Fitting Co.,Ltd.
HELPING CHINA'S AUTO PARTS MARKET AND ACHIEVING WORLD NO.1
Add to Cart
Parameter:
| Model Number
| WXTT007
|
| Car Model
| For Toyota Estima Emina/Previa2.4/4Runer3.0
|
| Type
| Ac Compressor
|
| Year Model
| 1990-2000
|
| Compressor type
| 10PA17E
|
| OE NO.
| 8832028160/8832028200/1472004555
|
ß ß ßWeixing’s packaging and shock-proof foams, which have protective functions.
Their thickness is thicker than ordinary box and foam , Relatively speaking, the quality of Weixing’s packaging is better than that of ordinary packaging.
ß ß ß It has the advantages of good stiffness and high wear resistance.
It is deeply loved by domestic and foreign customers.
Test car air conditioning compressor
1. Start by visually inspecting the compressor for any signs of damage or leakage.
2. Measure the voltage at the compressor's electrical connector using a multimeter to ensure it is receiving power.
3. Check the clutch engagement by turning on the air conditioning and observing if the compressor clutch engages and spins freely.
4. Use a manifold gauge set to check the high and low side pressures. Compare the readings to the manufacturer's specifications to determine if the compressor is functioning properly.
5. If all other tests indicate a fault with the compressor, it may need to be removed and taken to a qualified professional for further testing and repair.
When it comes to installing a car air conditioning compressor, it is recommended to follow these steps:
1. Start by removing the refrigerant from the system using a refrigerant recovery machine.
2. Disconnect the electrical connector and any mounting brackets or bolts securing the compressor to the engine.
3. Remove the drive belt and any other components obstructing access to the compressor.
4. Replace the old compressor with the new one, ensuring the fittings are properly aligned and any gaskets or seals are in place.
5. Reinstall the mounting brackets, bolts, and electrical connector.
6. Reinstall any components that were removed to access the compressor.
7. Evacuate and recharge the system with the appropriate amount of refrigerant following the manufacturer's guidelines.
8. Test the system to ensure the compressor is functioning properly and there are no leaks.
Please note that it is recommended to consult the vehicle's service manual or seek professional assistance for specific instructions on testing and installing a car air conditioning compressor.