Guangzhou Weixing Automobile Fitting Co.,Ltd.
HELPING CHINA'S AUTO PARTS MARKET AND ACHIEVING WORLD NO.1
Add to Cart
96568208 96406679 Car AC Cooling Compressor For Chevrolet Spark M200 For Daewoo Matiz WXCV065
Parameter:
| Model Number | WXCV065 |
| Car Model | 96568208 96406679 Car AC Cooling Compressor For Chevrolet Spark M200 For Daewoo Matiz WXCV065 |
| Year Model | 1998-2013 |
| Compressor model | SP10 4PK |
| Type | Air Conditioner Compressor |
| OE No. | 96568208/96406679/96565233/93741202/93741203/93741204/93741205/93741207/93741206/93741207 |
Installing a car AC compressor can be a relatively complex process that involves several steps. Here's a general outline of the installation process:
1. Gather Necessary Tools and Equipment: Before you start, make sure you have all the required tools and equipment. This may include wrenches, sockets, ratchet, refrigerant recovery machine (if necessary), new compressor, new O-rings, PAG oil, manifold gauge set, vacuum pump, and safety equipment like gloves and goggles.
2. Prepare the Vehicle: Ensure the vehicle is parked on a flat surface and turned off. Open the hood and locate the AC compressor, which is typically driven by a belt connected to the engine.
3. Relieve Pressure: If the AC system has any remaining refrigerant, it needs to be evacuated using a refrigerant recovery machine. This should only be done by a certified technician with the proper equipment to handle refrigerants safely.
4. Remove the Old Compressor: Disconnect the negative terminal of the battery to prevent electrical accidents. Remove the serpentine belt from the compressor pulley. Disconnect any electrical connectors or mounting bolts securing the compressor to the engine. Carefully remove the old compressor from its mounting brackets.
5. Prepare the New Compressor: Before installing the new compressor, transfer any necessary components from the old compressor to the new one, such as mounting brackets, sensors, or pulleys. Make sure to replace any O-rings or seals with new ones to prevent leaks.
6. Install the New Compressor: Position the new compressor in place and secure it with mounting bolts. Reconnect any electrical connectors. Install the serpentine belt back onto the compressor pulley and ensure it's properly tensioned according to the manufacturer's specifications.
7. Recharge the AC System: Connect the manifold gauge set to the high and low-pressure ports on the AC system. Use a vacuum pump to remove any air and moisture from the system, creating a vacuum. Once the system is evacuated, close the valves on the manifold gauge set and wait to see if the system holds the vacuum. If it does, charge the system with the appropriate amount of refrigerant according to the manufacturer's specifications.
8. Check for Leaks and Functionality: After recharging the system, start the engine and turn on the AC. Check for any leaks around the compressor or other components using a UV dye or leak detection tool. Ensure that the AC system is cooling properly and that all functions are working correctly.
9. Final Checks: Double-check all connections, belts, and system pressures to ensure everything is installed correctly and functioning properly.
10. Reconnect Battery: Once everything is confirmed to be in working order, reconnect the negative terminal of the battery.
If you're not experienced with automotive repairs, it's recommended to have a professional mechanic or technician perform the installation to ensure it's done correctly and safely. Additionally, handling refrigerants requires proper certification and equipment to comply with environmental regulations and ensure safety.
