12V Car AC Air Conditioner ATC086G15 8103100AT01 For ChangAn For Ruixing 4G13 WXCA022
| Model Number | WXCA022 |
| Type | Air conditioner compressor |
| Car Model | For ChangAn For Ruixing 4G13 For 4G15S 1.3 For 1.5 |
| Compressor model | 086G15 5PK |
| Voltage | 12V |
| OE No. | ATC086G15/8103100AT01/SW609211/WXH086G1 |
Compressor pictures
Replacing Your Automotive Air Conditioning Compressor - A Detailed Guide
1.Preparation:
- Ensure you have the correct replacement compressor for your vehicle model.
- Gather all necessary tools, including wrenches, screwdrivers, refrigerant recovery equipment, and safety gear.
2.Safety Precautions:
- Wear protective clothing, gloves, and eye protection.
- Disconnect the battery to prevent electrical shock.
3.Refrigerant Recovery:
- Use a refrigerant recovery machine to remove all refrigerant from the system. This is crucial to avoid environmental contamination and to prevent compressor damage during the replacement process.
4.System Draining:
- Drain any residual oil or refrigerant from the system.
5.Compressor Removal:
- Disconnect the compressor from the electrical system.
- Unbolt the compressor and disconnect any hoses or lines attached to it.
- Carefully remove the compressor, taking note of any special mounting brackets or spacers.
6.Compressor Inspection:
- Before installing the new compressor, inspect the system for any signs of damage or contamination.
- Clean the system as necessary to remove debris or oil residue.
7.Compressor Installation:
- Install the new compressor in its original location, ensuring proper alignment and secure mounting.
- Reconnect all hoses and lines, tightening all connections to the manufacturer's specifications.
8.Oil Addition:
- Add the correct amount and type of compressor oil as specified by the manufacturer.
9.Evacuation and Charging:
- Evacuate the system to remove any air or moisture.
- Charge the system with the correct amount of refrigerant.
10.System Testing:
- Start the engine and test the AC system to ensure proper operation.
- Check for any leaks or abnormal noises.
11.Final Inspection:
- Verify that all connections are tight and that the compressor is operating within normal parameters.
