Guangzhou Weixing Automobile Fitting Co.,Ltd.
HELPING CHINA'S AUTO PARTS MARKET AND ACHIEVING WORLD NO.1
Add to Cart
For Ford Flex 12V Car AC Compressor 8G1Z19703AA 9G1Z19703B 8G1319497AA HS18 WXFD106
| Model Number |
WXFD106
|
| Type |
Air conditioner compressor
|
| Car Model |
For Ford For Flex For Taurus For Lincoln
|
| Compressor model |
HS18 6PK
|
| Voltage |
12V
|
| OE.NO |
8G1Z19703AA/9G1Z19703B/8G1319497AA
|
Compressor pictures
How to Replace a Car Air Conditioning Compressor
Step 1: Safety First
Before starting, ensure the car is parked on a flat surface and the engine is turned off. Disconnect the negative terminal of the battery to prevent any electrical accidents. Wear safety gloves and goggles to protect yourself from refrigerant and debris.
Step 2: Recover the Refrigerant
The AC system contains refrigerant, which must be safely recovered using a refrigerant recovery machine. This step is crucial to avoid releasing harmful chemicals into the environment. If you don’t have the equipment, consult a professional.
Step 3: Remove the Old Compressor
Locate the compressor, usually found near the engine. Remove the serpentine belt by loosening the tensioner. Disconnect the electrical connectors and refrigerant lines connected to the compressor. Be prepared for some residual refrigerant to escape, so keep a cloth handy. Unbolt the compressor from its mounting bracket and carefully remove it.
Step 4: Install the New Compressor
Position the new compressor onto the mounting bracket and secure it with bolts. Reconnect the refrigerant lines and electrical connectors. Ensure all connections are tight to prevent leaks. Reinstall the serpentine belt and adjust the tensioner as needed.
Step 5: Recharge the AC System
Once the new compressor is installed, the system must be vacuumed to remove air and moisture. Use a vacuum pump for this step. After vacuuming, recharge the system with the appropriate amount of refrigerant as specified in your car’s manual.
Step 6: Test the System
Reconnect the battery and start the engine. Turn on the AC and check if it’s blowing cold air. Listen for unusual noises, which could indicate a problem with the installation.
Replacing a car AC compressor can be challenging, but with patience and the right tools, it’s a task you can accomplish. If you’re unsure at any point, don’t hesitate to seek professional assistance.